HP TouchSmart 300-1124 HP VESA Adapter Assembly Installation Guide - Page 3
-B22
View all HP TouchSmart 300-1124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installing the VESA Adapter Assembly (continued) Installing the VESA Adapter Assembly (continued) 6. Secure the VESA top bracket to the VESA bracket base using the four 8-mm (0.3-inch) screws provided. 100 mm 7. Be sure the third- party wall-mounting A B A B A device (sold separately) that you plan to use with the TouchSmart300 supports the 100 mm required VESA standard 100mm A B A B A (3.9 inches) x 100mm (3.9 inches) hole pattern (holes marked with "B"), designed for flat panel displays ranging in size from 508mm (20 inches) to 582mm (22.9 inches) diagonal, and weighing up to 22.7 kg (50 lbs). To install the computer leg inserts before wall-mounting the computer, see "Installing the Leg Inserts." Installing the Leg Inserts (All Models) Installing the Leg Inserts (All Models) NOTE: HP TouchSmart600 and HP TouchSmart 9100 models shown below. 1. Remove the screws from the computer legs, and then remove the legs. 2. Install the leg inserts and secure with the two 8-mm (0.3-inch) screws provided. The computer is now ready to be wall-mounted. Follow the hardware manufacturer's instructions on how to wall-mount the computer. *585922-B22* 585922-B22 © Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical and editorial errors or omissions contained herein. Second Edition: November 2009