HP TouchSmart 300-1129 Upgrading and Servicing Guide - Page 23
Installing a New CD/DVD Drive, two arrows next to the screw at the rear of the cage
View all HP TouchSmart 300-1129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing a New CD/DVD Drive 1 Insert the new CD/DVD drive into the cage. Orient the CD/DVD drive so that the connection for the cable aligns with the opening at the rear of the cage. 3 Connect the cable to the rear of the CD/DVD drive. 2 Insert and tighten the four screws on the sides of the CD/DVD cage - two on each side. 4 Insert the CD/DVD drive cage, making sure that the two arrows next to the screw at the rear of the cage line up. 5 Tighten the screw at the rear of the CD/DVD drive cage. TIP: Do not over-tighten these screws. It is easy to strip the screw heads. 584963-001 - Removing and Replacing a CD/DVD Drive 21
584963-001
— Removing and Replacing a CD/DVD Drive
21
Installing a New CD/DVD Drive
1
Insert the new CD/DVD drive into the cage. Orient the
CD/DVD drive so that the connection for the cable
aligns with the opening at the rear of the cage.
2
Insert and tighten the four screws on the sides of the
CD/DVD cage - two on each side.
3
Connect the cable to the rear of the CD/DVD drive.
4
Insert the CD/DVD drive cage, making sure that the
two arrows next to the screw at the rear of the cage
line up.
5
Tighten the screw at the rear of the CD/DVD drive
cage.
TIP:
Do not over-tighten these screws. It is
easy to strip the screw heads.