HP TouchSmart 300-1340 Upgrading and Servicing Guide - Page 8
Upgrading or Replacing Memory, Before You Begin, Computer Preparation
View all HP TouchSmart 300-1340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Upgrading or Replacing Memory 5 - 10 minutes Before You Begin Observe the following requirements before removing and replacing memory cards. Tools Needed z Torx or flat screwdriver - medium tip CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components. WARNING: z Never open the cover with the power cord attached or power applied. You may damage your computer. z Avoid touching sharp edges inside the computer. Computer Preparation 1 Remove any media (CD, DVD, and memory cards) from the computer. 2 Shut down the computer. 3 Unplug the computer by disconnecting the power cord from the back of the computer. 4 Unplug all attached cables from the back of the computer. 5 Set down a blanket, towel, or other soft cloth to protect the screen from scratches or other damage. Place the computer face-down on the soft surface. 6 584963-001 - Upgrading or Replacing Memory