HP TouchSmart 310-1037 Upgrading and Servicing - Page 17
Upgrading or Replacing Memory, Lift the stand to remove it from the computer.
View all HP TouchSmart 310-1037 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
7 Lift the bottom edges of the stand cover to remove it from the stand. 9 Lift the stand to remove it from the computer. 8 Remove the four screws that attach the stand to the back of the computer, using a flathead or Torx screwdriver. 10 Insert a large paper clip into the hole on the CD/DVD drive cover to release the CD/DVD drive tray. 11 Pull the CD/DVD drive tray out slightly and use a #1 Phillips screwdriver to loosen the two captive screws. 628371-001 - Upgrading or Replacing Memory 15
628371-001 — Upgrading or Replacing Memory
15
7
Lift the bottom edges of the stand cover to remove it
from the stand.
8
Remove the four screws that attach the stand to the
back of the computer, using a flathead or Torx
screwdriver.
9
Lift the stand to remove it from the computer.
10
Insert a large paper clip into the hole on the CD/DVD
drive cover to release the CD/DVD drive tray.
11
Pull the CD/DVD drive tray out slightly and use a #1
Phillips screwdriver to loosen the two captive screws.