HP TouchSmart 520-1160xt Getting Started - Page 15
Connecting the TV signal source with a set-top box and using S-video or, composite video cable
View all HP TouchSmart 520-1160xt manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the TV signal source with a set-top box and using S-video or composite video cable To use video output from the set-top box (F), add the cables to route video and audio to the computer: Do not detach any cables from the existing setup. Connect an S-video cable (or you can use an S-video-to-composite cable adapter) to the S-Video In connector (H) on the computer. Connect audio cables to the Audio In right (red) and left (white) connectors (J) on the computer. Connect the remote control cable/IR blaster (select models only) (G) to the IR OUT connector on the computer, and then position the blaster on the set-top box. This enables the computer to change the channel on the box. See "Using an infrared receiver (IR) blaster" on page 12 for blaster placement details. Callouts A TV signal cable (coaxial) wall outlet (from antenna or cable) B Splitter C Computer coaxial TV In connector D Video recorder E TV F Set-top box/satellite box G Remote control IR blaster cable (select models only) H Computer S-video In connector J Computer right and left Audio In (analog) connectors Setting Up Your Computer 11