HP TouchSmart Notebook - 15-r134cl HP 15 Notebook PC HP 15 TouchSmart Notebook - Page 62
Power button board, Remove the Phillips PM2.0×3.0 screw
View all HP TouchSmart Notebook - 15-r134cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Power button board Description Power button board (includes cable) Spare part number 749650-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the keyboard (see Keyboard on page 43). 6. Remove the top cover (see Top cover on page 51). To remove the power button board: 1. Position the top cover upside down. 2. Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the top cover. 3. Lift the board and cable up and remove from the top cover (2) while pulling cable through the hole in top cover (3). Reverse this procedure to install the power button board and cable. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts