HP TouchSmart tm2-1000 HP TouchSmart tm2 Notebook PC - Maintenance and Service - Page 49
Hard drive, Remove the hard drive
View all HP TouchSmart tm2-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Hard drive NOTE: The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar cover. Description 500-GB, 7200-rpm 320-GB, 7200-rpm 250-GB, 7200-rpm 160-GB, 7200-rpm Hard Drive Hardware Kit (includes hard drive bracket and hard drive screws) Spare part number 584381-001 584380-001 584379-001 584378-001 584382-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 39). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 captive screws that secure the hard drive cover to the computer. ENWW Component replacement procedures 41