HP TouchSmart tm2-1070us HP TouchSmart tm2 Notebook PC - Maintenance and Servi - Page 67
Pen holder and eject assembly, that secure the pen holder and eject assembly
View all HP TouchSmart tm2-1070us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Pen holder and eject assembly Description Pen holder and eject assembly Spare part number 592972-001 Before removing the pen holder and eject assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 39). 5. Remove the following components: a. Hard drive (see Hard drive on page 41). b. Memory cover (see Memory module on page 47). c. Top cover (see Top cover on page 55). Remove the pen holder and eject assembly: 1. Remove the three Phillips PM2.0×4.0 screws (1) that secure the pen holder and eject assembly to the base enclosure. 2. Remove the pen holder (2) and eject assembly (3) from the base enclosure. Reverse this procedure to install the pen holder and eject assembly. ENWW Component replacement procedures 59