HP TouchSmart tx2-1100 HP TouchSmart tx2 Notebook PC - Maintenance and Service - Page 49
Memory module, and swing it to the right.
View all HP TouchSmart tx2-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Memory module Description 4096-MB (DDR2, PC2-6400, 800-MHz) 2048-MB (DDR2, PC2-6400, 800-MHz) 1024-MB (DDR2, PC2-6400, 800-MHz) Spare part number 506062-001 506061-001 506060-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 35). Remove the memory module: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the memory module compartment cover to the computer. 3. Lift the left side of the cover (2) and swing it to the right. 4. Remove the memory module compartment cover. NOTE: The memory module compartment cover is included in the Plastics Kit, spare part number 487926-001. 5. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) Component replacement procedures 41