HP TouchSmart tx2-1102au HP TouchSmart tx2 Notebook PC - Maintenance and Servi - Page 65
Lift the top cover straight up and remove it., Reverse this procedure to install the top cover.
View all HP TouchSmart tx2-1102au manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
5. Release the ZIF connector (2) to which the TouchPad cable is connected and disconnect the TouchPad cable (3). 6. Remove the two Phillips PM2.0×4.0 screws (4) that secure the top cover to the base enclosure. 7. Lift the top cover straight up and remove it. Reverse this procedure to install the top cover. Component replacement procedures 57
5.
Release the ZIF connector
(2)
to which the TouchPad cable is connected and disconnect the
TouchPad cable
(3)
.
6.
Remove the two Phillips PM2.0×4.0 screws
(4)
that secure the top cover to the base enclosure.
7.
Lift the top cover straight up and remove it.
Reverse this procedure to install the top cover.
Component replacement procedures
57