HP TouchSmart tx2-1104au HP TouchSmart tx2 Notebook PC - Maintenance and Servi - Page 74
Release the audio/infrared board, system board.
View all HP TouchSmart tx2-1104au manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
i. System board (see System board on page 61) j. Pen holder (see Pen holder and pen eject assembly on page 64) Remove the audio/infrared board: 1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the audio/infrared board to the system board. 2. Release the audio/infrared board (2) by sliding it away from you until the connectors on the front of the board disengage from the openings in the base enclosure. 3. Remove the audio/infrared board (3). Reverse this procedure to install the audio/infrared board. 66 Chapter 4 Removal and replacement procedures
i.
System board (see
System board
on page
61
)
j.
Pen holder (see
Pen holder and pen eject assembly
on page
64
)
Remove the audio/infrared board:
1.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the audio/infrared board to the
system board.
2.
Release the audio/infrared board
(2)
by sliding it away from you until the connectors on the front
of the board disengage from the openings in the base enclosure.
3.
Remove the audio/infrared board
(3)
.
Reverse this procedure to install the audio/infrared board.
66
Chapter 4
Removal and replacement procedures