HP TouchSmart tx2-1209au HP TouchSmart tx2 Notebook PC - Maintenance and Servi - Page 50
RTC battery, Remove the battery see
View all HP TouchSmart tx2-1209au manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
RTC battery NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords and CMOS settings to be cleared. Description RTC battery Spare part number 449729-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 38). 5. Remove the hard drive cover (see Hard drive on page 40). Remove the RTC battery: ▲ Use a non-conductive, flat-bladed tool to pry the RTC battery out of the socket. Reverse this procedure to install the RTC battery. Be sure the RTC battery is installed with the "+" sign facing up. 42 Chapter 4 Removal and replacement procedures