HP TouchSmart tx2-1300 HP TouchSmart tx2 Notebook PC - Maintenance and Service - Page 62
that secure the top cover to the base enclosure., Reverse this procedure to install the top cover.
View all HP TouchSmart tx2-1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
5. Release the ZIF connector (2) to which the TouchPad cable is connected and disconnect the TouchPad cable (3). 6. Remove the two Phillips PM2.0×4.0 screws (4) that secure the top cover to the base enclosure. 7. Lift the top cover straight up and remove it. Reverse this procedure to install the top cover. 54 Chapter 4 Removal and replacement procedures
5.
Release the ZIF connector
(2)
to which the TouchPad cable is connected and disconnect the
TouchPad cable
(3)
.
6.
Remove the two Phillips PM2.0×4.0 screws
(4)
that secure the top cover to the base enclosure.
7.
Lift the top cover straight up and remove it.
Reverse this procedure to install the top cover.
54
Chapter 4
Removal and replacement procedures