HP Tx2 1025dx HP TouchSmart tx2 Notebook PC - Maintenance and Service Guide - Page 56
Switch cover, Remove the switch cover
View all HP Tx2 1025dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Switch cover Description Switch cover (includes display convertible hinge base cover) Spare part number 506827-001 Before removing the switch cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 35). 5. Remove the keyboard (see Keyboard on page 46). Remove the switch cover: 1. Turn the computer upside down, with the front toward you. 2. Remove the four Phillips PM2.0×7.0 screws that secure the switch cover to the computer. 3. Turn the computer display-side up, with the front toward you. 4. Open the computer. 48 Chapter 4 Removal and replacement procedures