HP VH22 User Guide - Page 28

1 640 × 480 2 720 × 400 3 800 × 600 4 1024 × 768 5 1280 × 720 6 1280 × 800 7 1280 × 1024 8 1440 × 900 9 1600 × 900 10 1680 × 1050 11 1920 × 1080 31.469 70.087 37.879 48.363 45.000 49.702 63.981 55.935 60.000 65.290 67.500 59.940 31.469 60.317 60.004 60.000 59.810 60.020 59.887 60.000 59.954 60.000 Entering user modes The video controller signal may occasionally call for a mode that is not preset if: ● You are not using a standard graphics adapter. ● You are not using a preset mode. It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, and then recognizes the new mode just as it does a preset mode. In addition to the factory preset modes, there are at least 10 user modes that can be entered and stored. Energy saver feature The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize 0.5 watts of power. There is a brief warm-up period before the monitor will return to its normal operating mode. Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features). NOTE: The above power saver feature only works when the monitor is connected to a computer that has energy saver features. By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes the monitor to enter the reduced power state, the power light blinks amber. 22 Appendix A Technical specifications