HP VL400 hp business pcs, remote software deployment, setup guide for PXE and - Page 7
In summary, users will need
View all HP VL400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
7 To install RIS, users will need a second drive letter (at least). RIS does not use C: or any drive letter with Windows 2000 or later OSs. As such, it is a good idea to have either a second hard disk drive or use at least 2 different partitions (minimum 4GB per partition). In summary, users will need: · One PXE server, running on a Windows 2000 Server, configured for DHCP server. This server is within a dedicated local network that is isolated from any other network. · One or more PXE-enabled clients. 7
7
To install RIS, users will need a second drive letter (at least). RIS
does not use C: or any drive letter with Windows 2000 or later
OSs. As such, it is a good idea to have either a second hard disk
drive or use at least 2 different partitions (minimum 4GB per
partition).
In summary, users will need:
±²
One PXE server, running on a Windows 2000 Server,
configured for DHCP server. This server is within a dedicated
local network that is isolated from any other network.
±²
One or more PXE-enabled clients.
7