HP Vectra VA 6/xxx HP Vectra va 6/xxx Pc Minitower User’s Guide - D42 - Page 27
Upgrading the MGA Millennium Board Memory
View all HP Vectra VA 6/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2 How to Install Accessories In Your PC Installing Memory Upgrading the MGA Millennium Board Memory 1 Switch off the display and computer, and disconnect the power supply cables and any telecommunications cables. Remove the computer's cover. 2 Unscrew and remove the screw securing the MGA Millennium board. Put the screw to one side. Note which slot the board is in. 3 Carefully remove the board from its slot, holding the board at each end by its top edge. Do not bend the board. With its components facing up, place the board on a clean, flat, solid, static-free surface. Handle the board by its edges. 4 Install the memory module on the video board. Carefully slide the board back into its slot. Firmly press the board into the socket. Make sure that the board's connector engages completely with the socket and does not touch components on other boards you may have installed. Secure the board by replacing the screw. Carefully install the video memory module English 17