HP Vectra VEi8 hp business pcs, remote software deployment, setup guide for PX - Page 5
Introduction
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1. Introduction The scope of this document is to evaluate the remote deployment capabilities and basic troubleshooting for PXE or RIS. It also partially illustrates some network concepts and the reader is assumed to have a basic knowledge of networking (DHCP, DNS, IP address...). In addition, this document illustrates how to setup Microsoft RIS and successfully deploy an image on a client. RIS uses the PXE capability and can be considered a PXE server. Only when the PXE server is also DHCP server is covered in this document (where a DHCP server is not also a PXE server, refer to the PXE server's documentation). A RIS and other PXE servers' cohabitation will not be developed. At the end of this document, users should be able to start a PXE client that will behave as if started from a bootable floppy - when it will actually boot on the LAN through the PXE. The following procedures are, however, only intended for evaluation purposes and may not totally reflect a real configuration. Note. To guide you through the OS interface, the following notation will be used: Text in Bold or between " " represents a text box, an icon or a list on which you can click. For example, the OS's Start menu. "Select OK" means left click on the dialog box or text item named OK. "right click on My Computer icon" means left click to select the My Computer icon, then right click on it once. "Go to Start/Settings/Control Panel" means left click on Start, then on Settings, and finally on the Control Panel. 5