HP Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 HP BladeS - Page 6
Command line syntax
View all HP Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
• A VCSU update operation can be performed from a server blade in the same enclosure that is being updated. However, this feature is supported only when using a redundant network configuration on the server blade running the VCSU client. • This version of VCSU supports c3000 and c7000 enclosures. • VCSU does not update modules that are powered off, non-functional, or not physically present. A status message indicates whether any modules are in these states. • VCSU does not update unknown or unsupported module types, including pass-thru Ethernet and FC modules. • HTTP and HTTPS downloads are restricted to non-authenticated websites. • FTP downloads are restricted to non-SSL/TLS, Passive Transfer Mode FTP sites. • IP addresses that are not accessible time out within 20 seconds. IP addresses that have an active SSL-enabled web server, but not an OA, fail immediately. • Prior to running VCSU, ensure that the maximum supported number of local user accounts for the Onboard Administrator has not been reached. For multi-enclosure domains, verify this information for each enclosure in the domain. • VCSU does not use any root certificates to connect to OA and VC. • VCSU does not support updating the firmware using IPv6 Link Local Addresses on Linux or HP-UX. • VCSU does not support the Windows 2008-based IIS FTP server for downloading the firmware. Supported modules Module Supported in VCSU 1.9.0 HP 1/10Gb Virtual Connect Ethernet Module HP 1/10Gb-F Virtual Connect Ethernet Module HP Virtual Connect Flex-10 10Gb Ethernet Module HP Virtual Connect FlexFabric 10Gb/24-port Module HP Virtual Connect Flex-10/10D Module HP 4Gb Virtual Connect Fibre Channel Module HP Virtual Connect 4Gb Fibre Channel Module HP Virtual Connect 8Gb 24-Port Fibre Channel Module HP Virtual Connect 8Gb 20-Port Fibre Channel Module Yes* Yes* Yes Yes Yes** Yes† Yes Yes Yes * Supported only for updates to VC version 3.60 or lower. This module is not supported for updates to VC version 3.70 or higher. ** Supported only for updates to VC 3.70 or higher. This module is not supported for updates to VC version 3.60 or lower. † Supported only for updates to VC 4.01 or lower. This module is not supported for updates to VC version 4.10 or higher. Command line syntax CLI input is case-insensitive except when otherwise noted. The general CLI syntax is as follows: vcsu -a Parameters are extensions that provide extra information required for the execution of a particular command. Whether or not a parameter is required depends on the specific action being executed. Introduction 6