HP Visualize J5000 hp Visualize J5000, J7000 workstations owner's guide (a4978 - Page 76
Removing a Hard Disk Drive,
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
CAUTION Figure 3-2 Hot-Pluggable Hard Disk Drives The Disk Drives Removing a Hard Disk Drive The instructions for removing a disk drive from the J5000/J7000 are printed on the front panel, and are visible when the panel door is opened, as shown in the detail below. If you are removing a hard disk drive while the system is running, you must perform the operations outlined in "The Hot-Plug Procedure" on page 83 before the physical removal of the drive, or data corruption is likely to occur. Removing a Hard Disk Drive The instructions are also printed here for your convenience: 1. Identify the drive to be removed, and make sure it is not currently in use. If the machine is to remain powered up, see the section "The Hot-Plug Procedure" on page 83 for the proper preparations. 2. Push the plastic retaining tab to the right, to release the drive-tray's handle. Pull the handle on the drive to unseat it from its power and data connections. 76 Chapter 3