HP Workstation c3650 hp workstations - HP A7789A Fire GL UX Graphics Card And - Page 1

Hewlett-Packard Company 3404 East Harmony Road Fort Collins, Colorado 80528 Read Before Installing HP A7789A Fire GL™-UX Graphics Card And Software System Prerequisites Your HP workstation must meet the following prerequisites to support the Fire GL-UX graphics option: 1. Hardware requirements - The A7789A Fire GL-UX card is supported only on hp j6000 and HP PA-RISC workstations with the PA-8700 or later processors. At this time, the only supported models are the HP c3650, c3700, j6000 and j6700 Workstations. (HP has not tested other host systems and does not provide technical support for configurations other than these.) 2. O.S. requirements - The prerequisite OS software must be installed before the Fire GL-UX card will function as a console device. If the workstation was ordered with the Fire GL-UX card integrated at the factory and HP-UX ignited, the prerequisite software should already be installed. OS requirements for HP-UX 11.0: * General Release Patch Bundle, Nov. 1999 (ACE) * Hardware Enablement Patch Bundle, Mar. 2002 or later On Media: 11.0 (Core) Install/Update 11.0 Support Plus (Mar. 2002) OS requirements for HP-UX 11i: * Hardware Enablement Patch Bundle 11i, Mar. 2002 or later 11i Support Plus (Mar. 2002) You can confirm that you have the necessary O.S. revision and appropriate patch bundles by executing the following commands: $/usr/sbin/swlist -l bundle | grep ACE (for General Release patches) Pub. No. A7789-90001 A7789- 90001