HP Workstation x1000 ATI Fire GL 2 graphics card (read before installing) - Page 1
HP Workstation x1000 Manual
View all HP Workstation x1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Hewlett-Packard Company 3404 East Harmony Road Fort Collins, Colorado 80528 Read Before Installing Fire GL2 Graphics Card HP Product No. A6076A General HP Installation Instructions NOTE Before you install your graphics card, refer to the your workstation's Owner's Guide for important system configuration information. CAUTION Graphics cards are susceptible to electrostatic shock. When handling your card, always wear a properly grounded wrist strap and handle the card carefully. 1. Before opening your workstation to install the graphics card, disconnect all power, peripheral, and telecommunications cables from the system. When referring to your system model/type and for obtaining the proper driver version, use the AxxxxX nomenclature on the regulatory label (found next to the serial number regulatory label on the back of the machine). 2. Following the procedures described in your workstation's Owner's Guide, install the graphics board into the appropriate AGP Pro slot (see the system board slot diagram below). Slide the board into the slot, making sure the board is fully seated in the connector. Install graphics card in AGP Pro Slot Example system board 3. Once you have installed the card, you must install the proper graphics driver which is available on the enclosed A6076- 90001