HP Workstation x4000 3Dlabs Wildcat III 6110 user's guide - Page 15
your Wildcat III 6210 or Wildcat III 6110 Graphics Accelerator Card. If you have not already
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
SOFTWARE CONFIGURATION 4. Remove the cover from your system so you can access the slots into which you will be installing your Wildcat III 6210 or Wildcat III 6110 Graphics Accelerator Card. If you have not already removed any existing graphics card(s) from your system, then do so now. 5. If necessary, remove the back panel covers from the slots into which you are installing your Wildcat III 6210 or Wildcat III 6110 Graphics Accelerator Card, using a Phillips-head screwdriver. 6. If an anti-static wrist strap was included in your box, attach it to your wrist and attach the other end to a bare metal (as opposed to painted or sticker covered) surface on your system's chassis. 7. Remove your Wildcat III 6210 or Wildcat III 6110 Graphics Accelerator Card from its anti-static packaging. Write down the serial number for product registration and future use. The serial number is located on a board label and looks like this: 136001B123456 Made in XXX Week XXXX 3Dlabs Graphics Accelerator Card User's Guide 9