HP X1600 HP StorageWorks X1000 and X3000 Network Storage System user guide (56 - Page 109
System recovery, The System Recovery DVD, To restore a factory image - storageworks network
UPC - 884962047668
View all HP X1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
8 System recovery This chapter describes how to use the System Recovery DVD that is provided with your storage system. The System Recovery DVD The HP StorageWorks Storage System Recovery DVD that is provided with your storage system allows you to install an image or recover from a catastrophic failure. At any later time, you may boot from the DVD and restore the server to the factory condition. This allows you to recover the system if all other means to boot the server fail. While the recovery process makes every attempt to preserve the existing data volumes, you should have a backup of your data if at all possible before recovering the system. As of HP StorageWorks Network Storage System X1000/X3000 System Recovery DVD version 1.2, the DON'T ERASE volume is no longer used. If your system has a DON'T ERASE volume, the System Recovery process will ignore this volume. NOTE: The HP X1600 Network Storage System AW528A model requires that an external DVD drive is used to run the System Recovery DVD. To restore a factory image 1. Insert the bootable System Recovery DVD in the DVD drive. 2. Restart the storage system. 3. When the System Recovery DVD main window opens, click Restore Factory Image. Managing disks after a restoration After a system has been restored, drive letters may be assigned to the wrong volume. Windows Storage Server 2008 assigns drive letters after the restoration in the order of discovery. To help maintain drive letter information, placing the drive letter into a volume label is recommended. To change the drive letters to the appropriate one, go into Disk Management and perform the following steps for each volume: 1. Right-click the volume that needs to be changed. 2. Select Change drive Letter and Paths. 3. In the Change drive Letter and Paths dialog box, select Change. 4. Select the appropriate drive letter, then click OK. 5. Click Yes to confirm the drive letter change. X1000 and X3000 Network Storage System 109