HP XM600 hp kayak xm600 series 1, service handbook for minitower models - Page 12
Mass Storage Device Guide Rails
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HP Kayak XM600 Series 1 Minitower PC Workstations Mass Storage Device Guide Rails Attached on the side of the front access cage, additional guide rails are available for mass storage device installations. Depending on the device to be installed, dedicated guide rails are required and are easily recognized by their distinct size and color. The following table indicates the device, location, and required rails. Device to be Installed Location Required Rails Installing the Rails 3.5-inch device (hard disk drive) 3.5-inch internal shelf (two shelves) Short blue left and right rails Insert the guide rail labeled "L" on the left-hand side (cable connectors facing towards you and positioned at the bottom), and the guide rail "R" on the right-hand side of the hard disk drive. 5.25-inch device 1 (CD-ROM, etc.) 5.25-inch front access cage shelf Long green rails There is no specific side to which these guides must be installed. However, they must be inserted in the two holes located at the bottom of the drive. Third 3.5-inch hard disk drive Hard disk drive is mounted on the pre-installed 5.25-inch hard disk drive tray and secured to the tray using the supplied four screws. 3.5-inch device (zip drive, etc.) Short green left and right rails Carefully break off the metal plate from the chassis. Insert the guide rail labeled "L" on the left-hand side (cable connectors facing towards you and positioned at the top), and the guide rail "R" on the righthand side of the hard disk drive. 1-12 HP Kayak XM600 Series 1 Minitower PC Workstations Minitower PC Workstations