HP XM600 hp kayak xm600 series 1, upgrading memory - Page 3

Upgrading RDRAM Memory RDRAM models of the HP Kayak XM600 PC Workstation support one or two RAMBUS Direct RAM (RDRAM) memory modules NOTE Use only the HP memory modules provided for your PC model. If you want to find out about available accessories for your PC, refer to the HP Accessories Web site at: http://www.hp.com/go/pcaccessories If only one RDRAM module is installed • it must be installed in the socket RIMM0, nearest the processor(s) • the socket RIMM1 must contain an RDRAM Continuity Module • the socket RIMM2 must contain an RDRAM Terminator Module. If two RDRAM modules are installed • they must be installed in the two sockets nearest the processor(s), RIMM0 and RIMM1 • ECC and non-ECC modules can be mixed, but if this is done, all memory will operate in non-ECC mode • the socket RIMM2 must contain an RDRAM Terminator Module. Second RDRAM module, or RDRAM Continuity Module if unused RDRAM Terminator Module marked "CTRIMM" First RDRAM module Processor 2, or processor terminator card if unused Processor 1 System board edge 3