HP XM600 hp kayak xm600 series 2, technical reference manual for desktop and m - Page 36
Accessory Board Slots, AGP Pro Universal Slot (Minitower Models)
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2 System Board Accessory Board Slots Accessory Board Slots The following block diagram shows the position of the accessory board slots on the system board. One AGP Universal Pro slot. Five 32-bit 33 MHz PCI slots: PCI Slot 1, PCI Slot 2, PCI Slot 3, PCI Slot 4, PCI Slot 5 System board edge (PCI Slot 1) (PCI Slot 2) (PCI Slot 3) (PCI Slot 4) (PCI Slot 5) AGP Pro Universal Slot (Minitower Models) Minitower models of the HP Kayak XM600 Series 2 are equipped with a single AGP (Accelerated Graphics Port) Pro Universal graphics slot. The AGP Pro Universal slot provides the ultimate graphics performance for high-end graphics cards, combining AGP 4X bandwidth (with data transfer rates up to 1056 MB/sec) with the ability to accept high-end graphics cards drawing up to 50 W of power. To accommodate AGP Pro graphics cards, the AGP PRO Universal slot connector is wider than the standard AGP 4X connector. Additional pins have been added at both ends of the connector to meet the increased power requirements of AGP Pro graphics cards. The AGP Pro Universal slot connector still accepts all existing 3.3 V and 1.5 V AGP cards. An AGP Pro card may draw power either from the existing part of the AGP Pro connector, the extended part, or a combination of the two. In all cases, the maximum power that may be drawn by an AGP Pro card is limited to 36