HP XM600 hp kayak xm600, setting up and using your pc workstation for desktop
HP XM600 - Kayak - 128 MB RAM Manual
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP XM600 manual content summary:
- HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 1
Workstation on a sturdy desk with easily accessible power outlets and enough space for the keyboard, mouse, and any other accessories. The HP Kayak XM600 Desktop PC Workstation your PC Workstation. However, if you plan to install a disk drive or an accessory board inside your PC Workstation, you will - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 2
are automatically configured as soon as they are physically attached to the PC Workstation. USB accessories are not supported by all operating systems. Line Out Jack. The internal audio speaker is deactivated when you use the Line Out jack. External speakers should have a built-in power supply. 2 - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 3
bar (multimedia models only). The keyboard power-on feature will work only if the appropriate system board switch is set (default setting = enabled). When you switch on the computer, it carries out the Power-On-SelfTest (POST) while the PC Workstation's logo is displayed. If you wish to view the - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 4
on, the HP PC Workstation's logo is displayed. The PC Workstation performs a Power-On-Self-Test (POST). 2 The software initialization process starts. It displays the software license agreement, gives you an opportunity to read Working in Comfort (ergonomics advice for computer users), then asks - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 5
files, or open sites on the WWW. • Launch the Internet browser supplied with your system. • Lock or suspend your PC Workstation. • Access HP TopTools and customer information. • Mute or adjust the volume of the audio system. • A headphone and microphone can be connected directly to the keyboard. For - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 6
upgrade accessories. To check the configuration: 1 Turn on the display and then the PC Workstation. If the PC Workstation is already turned on, save your data and exit all programs, then restart the PC Workstation. Consult your operating system documentation for any special instructions concerning - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 7
and Using Your PC Workstation Using the HP Setup Program Using the HP Setup Program Use the Setup program to configure your PC Workstation (for example: setting up system and user passwords, installing and upgrading mass storage devices), and to solve configuration problems. It is recommended that - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 8
an IRQ is generated, while the Network Interface option enables the system to return to normal speed when a specific command is received by the network interface. Standby Delay (slows down the processor) and Suspend delay (saves a maximum of energy) options are only relevant for the Windows 95 SR2 - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 9
Up and Using Your PC Workstation Setting Passwords in the HP Setup Program Setting Passwords in the HP Setup Program You can set passwords to provide different levels of protection for your PC Workstation, the Administrator password, the User password and the Power-on password. You set these - HP XM600 | hp kayak xm600, setting up and using your pc workstation for desktop - Page 10
troubleshooting and makes remote administration easier. For more information about TopTools, connect to HP's web site at: www.hp.com/toptools. Software and Drivers In the "Software and Drivers" section of the HP support site www.hp.com/go/kayaksupport, you can download the latest drivers and BIOS
Setting Up and Using Your
PC Workstation
WARNING
If you are in any doubt that you can lift the PC Workstation and the
display safely, do not try to move them without help.
1
When you receive your PC Workstation, unpack all of the components.
2
Place the PC Workstation on a sturdy desk with easily accessible power
outlets and enough space for the keyboard, mouse, and any other
accessories.
The HP Kayak XM600 Desktop PC Workstation must be placed
horizontally (flat position) and not vertically (on its side).
3
Position the PC Workstation so that its rear connectors are easily
accessible.
Installation Tools
No tools are required to install your PC Workstation. However, if you plan to
install a disk drive or an accessory board inside your PC Workstation, you
will need a flat-blade screwdriver. For more information on installing
accessories, refer to the Section on “Installing and Replacing Hardware
Parts in Your PC Workstation”.