HP XM600 hp kayak xm600, setting up and using your pc workstation for desktop - Page 1

Setting Up and Using Your PC Workstation WARNING Installation Tools If you are in any doubt that you can lift the PC Workstation and the display safely, do not try to move them without help. 1 When you receive your PC Workstation, unpack all of the components. 2 Place the PC Workstation on a sturdy desk with easily accessible power outlets and enough space for the keyboard, mouse, and any other accessories. The HP Kayak XM600 Desktop PC Workstation must be placed horizontally (flat position) and not vertically (on its side). 3 Position the PC Workstation so that its rear connectors are easily accessible. No tools are required to install your PC Workstation. However, if you plan to install a disk drive or an accessory board inside your PC Workstation, you will need a flat-blade screwdriver. For more information on installing accessories, refer to the Section on "Installing and Replacing Hardware Parts in Your PC Workstation".