HP XM600 hp kayak xm600, setting up and using your pc workstation for minitowe - Page 8
Using the HP Setup Program, Starting the HP, Program
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting Up and Using Your PC Workstation Using the HP Setup Program Using the HP Setup Program Use the Setup program to configure your PC Workstation (for example: setting up system and user passwords, installing and upgrading mass storage devices), and to solve configuration problems. It is recommended that you take note of any changes to the system setup. NOTE Setup changes system behavior by modifying the power-on initialization parameters. Setting incorrect values may cause system boot failure. Should this occur, press to load the Setup default values to recover. Starting the HP Setup Program 1 Turn on the display and then the PC Workstation. If the PC Workstation is already turned on, save your data and exit all programs, then restart the PC Workstation. 2 Press while Setup is displayed at the bottom of the screen. If you fail to press in time and the start-up process continues, you will need to restart your PC Workstation and go through the POST again so you can press . The opening screen of the PC Workstation's Setup program is displayed. The Main Menu presents a list of fields, for example, the installed BIOS version or Date and Time. A band along the top of the screen offers a list of menus. A menu is selected by using either the left or right arrow keys. For more information on the Setup program, refer to the Troubleshooting Guide, available on the HP web site at: http://www.hp.com/go/kayaksupport, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu. 8