HP XP1024 HP StorageWorks Disk Array XP operating system configuration guide O - Page 13
Install and con, gure the disk array, Setting the System Option Modes
View all HP XP1024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Install and configure the disk array The HP service representative performs these tasks: • Assembling hardware and installing software • Loading the microcode updates • Installing and formatting devices After these tasks are finished, you will use Remote Web Console, Command View, Command View XP Advanced Edition, or LUN Configuration and Security Manager to complete the remaining tasks listed below. If you do not have these programs, your HP service representative can perform these tasks for you. The following restrictions apply when configuring any XP disk array with an OpenVMS host: • When an XP port is assigned to OpenVMS, that port may not be shared with any other operating system. • Multiple OpenVMS hosts may share the same XP port. • Sharing of CHA microprocessors is not recommended. Setting the System Option Modes The HP service representative sets the System Option Mode(s) based on the operating system and software configuration of the host. Mode 161 228 278 Level Mandatory Mandatory Mandatory Description and Usage Allows high-speed microprocessor FW update. Provides unique UUIDs to the boot device, which allows the SRM console WWIDMGRquickset to discover multiple boot paths. RCSN notification that allows new XP128 ports to be used/identified when adding to an existing configuration. Disk Array XP operating system configuration guide OpenVMS 13