HP XP1024 HP StorageWorks Disk Array XP operating system configuration guide: - Page 9
Installation - business copy
View all HP XP1024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1 Installation You and your HP service representative each play a role in installation. Your HP service representative is responsible for installing the disk array and formatting the disk devices. You are responsible for configuring the host server for the new devices with assistance from your HP service representative. Features and requirements Ask your HP service representative about the latest supported hardware and software. The disk array and host have the following features: • XP128: From 8 to 128 drives for up to 36 TB, 48 FC ports XP1024: From 8 to 1024 drives for up to 149 TB, 64 FC ports XP10000: Up to 240 drives for up to 69.2 TB, 48 FC ports XP12000: Up to 1152 drives for up to 332 TB, 128 FC ports • Server support. HP-UX-supported processor • Operating system support. HP-UX, version 10.20, 11.0, or 11i v2 with the latest patches (if any) Before installing the disk array, ensure the environment conforms to these requirements: • Host Bus Adapters (HBAs). Install HBAs and all utilities and drivers. Refer to the adapter documentation for installation details. • (Recommended) HP StorageWorks Remote Web Console XP, Command View XP Advanced Edition or Command View XP with LUN management feature for configuring disk array ports and paths • (Recommended) HP StorageWorks LUN Configuration and Security Manager XP • (Optional) Other available XP software (some may not apply to your system): HP StorageWorks Business Copy XP HP StorageWorks Continuous Access XPHP StorageWorks Continuous Access Extension XP HP StorageWorks Continuous Access Extension XP HP StorageWorks Auto LUN XP HP StorageWorks Data Exchange XP HP StorageWorks Resource Manager XP HP StorageWorks RAID Manager XP HP StorageWorks Cache LUN XP Disk Array XP operating system configuration guide: HP-UX 9