HP XP1024 HP StorageWorks Disk Array XP operating system configuration guide: - Page 18
Install and con, gure the host
View all HP XP1024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Install and configure the host This section explains how to install and configure the host and host bus adapters (HBAs) that connect the host to the disk array. Loading the OS and software Follow the manufacturer's instructions to load the operating system and software onto the host. Load all OS patches and configuration utilities supported by HP and the HBA manufacturer. If you purchased multipath software, install it according to the manufacturer's instructions. Installing and configuring the HBAs Install and configure the host bus adapters using the HBA manufacturer's instructions. HP supplies driver, firmware, and BIOS downloads for commonly available HBAs. These downloads contain HBA settings that are tested and approved by HP. To obtain a download, log onto the HP website at www.hp.com and search for the model name or number of your HBA. Download the file, and follow the installation instructions in the "readme" or documentation file supplied with each download. 18 Installation