HP XP20000/XP24000 HP StorageWorks XP Disk Array Configuration Guide for Linux - Page 16
Fabric and Connection parameter settings, HP StorageWorks, SAN Design Reference Guide
![]() |
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Fabric and Connection parameter settings Set each array port to FABRIC ON or OFF with connections of POINT-TO-POINT or FC-AL as shown in the following figures and table. For detailed topology information, refer to the HP StorageWorks SAN Design Reference Guide at http://www.hp.com/go/sandesign. Figure 2 Simple point-to-point fabric topology example Table 3 Fabric topology settings Fabric parameter Connection parameter Provides ON FC-AL Not supported OFF FC-AL FL-port (private arbitrated loop; direct connect without a SAN) ON Point-to-Point N-port (SAN fabric port) OFF Point-to-Point Not supported 16 Installing and configuring Linux for the XP disk array
![](/manual_guide/products/hewlettpackard-xp20000xp24000-hp-storageworks-xp-disk-array-configuration-guide-linux-xp24000-xp20000-xp12000-xp10000-svs-200-a5951-96097-2007-9586eb3/16.png)
Fabric and Connection parameter settings
Set each array port to FABRIC ON or OFF with connections of POINT-TO-POINT or FC-AL as shown
in the following figures and table. For detailed topology information, refer to the
HP StorageWorks
SAN Design Reference Guide
at
h
t
tp://w
w
w
.hp
.co
m/go/s
ande
si
gn
.
Figure 2 Simple point-to-point fabric topology example
Table 3 Fabric topology settings
Provides
Connection parameter
Fabric parameter
Not supported
FC-AL
ON
FL-port (private arbitrated loop;
direct connect without a SAN)
FC-AL
OFF
N-port (SAN fabric port)
Point-to-Point
ON
Not supported
Point-to-Point
OFF
Installing and configuring Linux for the XP disk array
16