HP XP24000 HP StorageWorks XP Disk Array Configuration Guide for Novell Netwar - Page 13

Figure 1 SNMP configuration Installation roadmap Perform these actions to install and configure the disk array: 1. Installing and configuring the disk array • Setting the host mode and host group mode for the disk array ports • Setting the System Option Modes • Configuring the Fibre Channel ports 2. Installing and configuring the host • Loading the operating system and software • Installing and configuring the FCAs • Configuring NetWare Client • Configuring NetWare ConsoleOne • Fabric zoning and LUN security • Fabric zoning and LUN security for multiple operating systems 3. Connecting the disk array to the NetWare server • Defining the paths • Verifying new device recognition 4. Configuring disk devices • Creating the disk partitions • Assigning the new devices to volumes • Mounting the new volumes • Verifying client operations Installing and configuring the disk array The HP service representative performs these tasks: • Assembling hardware and installing software • Loading the microcode updates • Installing and formatting devices After these tasks are finished, use XP Remote Web Console, XP Command View, XP Command View Advanced Edition Software, or XP Array Manager to complete the remaining tasks listed below. If you do not have these programs, your HP service representative can perform these tasks for you. XP Disk Array Configuration Guide for Novell Netware 13