HP Xw460c HP BladeSystem OnBoard Administrator Module Installation Instruction

HP Xw460c - ProLiant - Blade Workstation Manual

View all HP Xw460c manuals Add to My Manuals Save this manual to your list of manuals

• 
  1

Match case Limit results 1 per page

---

100% Actual Size Fit Width Fit Height Fit Page Automatic

HP BladeSystem Onboard

Administrator Module

Installation Instructions

for HP BladeSystem c7000 Enclosures

© Copyright 2006 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

March 2006 (First Edition)

Part Number 413967-021

Installing Onboard

Administrator modules

The HP BladeSystem c7000 Enclosure is shipped with one HP

BladeSystem Onboard Administrator module installed and can

support up to two Onboard Administrator modules. Install

Onboard Administrator modules based on the total number

ordered:

•

One Onboard Administrator module: Bay 1

•

Two Onboard Administrator modules: Bays 1 and 2

Install an Onboard Administrator blank in an unused Onboard

Administrator bay.

NOTE:

When two Onboard Administrator modules are

installed, the module installed in Bay 1 is active and the

module installed in Bay 2 is redundant.

To install an Onboard Administrator module:

1.

Remove the Onboard Administrator blank, if present.

a.

Press the button on the front of the blank to release the

handle.

b.

Pull the handle, and slide the Onboard Administrator

blank out of the Onboard Administrator tray.

2.

Slide the Onboard Administrator module into the Onboard

Administrator tray, and close the handle. When the

Onboard Administrator module is fully inserted, it locks into

place.

The installation is complete.