HP Xw460c HP Insight Software Installation Checklist - Page 27

Parameter Privilege level Value User permissions Possible value Description Administrator, Operator, or User Only the Administrator can set the privilege level. • Administrator-Can perform all actions on the enclosure • Operator-Can perform all actions on the enclosure except administering users and certificates • User (read-only) • Can view all information • Can launch web interfaces to other devices • Cannot change any configuration settings - A list of the Onboard Administrator bays, server bays, and interconnect bays that can be managed by the user Server and interconnect EBIPA configuration parameters Enclosure Bay IP Addressing (EBIPA) enables you to assign static IP addresses to server bays, interconnect bays (or both) in the enclosure. These IP addresses are used by the server blade Integrated Lights Out (iLO) ports when inserted into a bay. In addition, an interconnect module (switch) management port, if available, uses the preassigned IP address when inserted into the interconnect bay. Omit this step if your network has an external DHCP service or if you want to manually assign static IP addresses individually to the server blades and interconnect modules. Record the configuration parameters in the following tables. Table 4-5 Shared device settings for device bays table Parameter Subnet mask Gateway Domain DNS server 1 DNS server 2 DNS server 3 NTP server 1 NTP server 2 Value Possible value Description where ### The subnet mask for the server ranges from 0 to 255 bays where ### The gateway address for the ranges from 0 to 255 server bays A character string that includes The domain name for the server alphanumeric characters and bays the dash where ### The IP address for the primary ranges from 0 to 255 DNS server where ### The IP address for the secondary ranges from 0 to 255 DNS server where ### The IP address for the tertiary ranges from 0 to 255 DNS server where ### The IP address of the primary ranges from 0 to 255 server that synchronizes time and date using the NTP protocol where ### The IP address of the secondary ranges from 0 to 255 server that synchronizes time and date using the NTP protocol Server and interconnect EBIPA configuration parameters 27