HP Xw6200 Hard Drive Bracket Installation - Page 1
HP Xw6200 - Workstation - 2 GB RAM Manual
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Hard Drive Bracket Installation HP Workstations This document describes how to install a 3.5-inch hard drive into a bracket so that the hard drive can be installed into a 5.25-inch bay. For product-specific information on installing the hard drive in a 5.25-inch bay, refer to the Service and Technical Reference Guide for your HP Workstation at http://www.hp.com/support/workstation_manuals. Installing the Bracket 1. Lower the hard drive into the bracket and secure the drive by inserting four #6-32 screws (shipped with this kit) through the holes in the sides of the bracket and into the threaded holes in the hard drive. 2. Refer to the Service and Technical Reference Guide for your HP Workstation for instructions on installing the hard drive into the 5.25-inch bay. 365445-001 © 2004 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered trademark of Hewlett-Packard Development Company, L.P.