HP Xw6400 Installing an IEEE-1394 card - Page 5
Step 4-Con cabling - workstation power supply
UPC - 882780645493
View all HP Xw6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installing an IEEE-1394 card Step 4-Configure cabling HP xw4000/xw6000 series workstations 1. Connect a flexible disk-type power connector from the workstation power supply to the power connector on the IEEE-1394 card 1. Connect the front IEEE-1394 I/O cable to the I/O connector on the IEEE-1394 card 2. Figure 3 Connect power cable to IEEE-1394 card 2. If necessary, remove the plastic plug or adhesive label from the front 1394 port. ✎ NOTE: If an adhesive label is covering the front 1394 port, the front bezel must be removed to remove the adhesive label. 5/12
5/12
Installing an IEEE-1394 card
Step 4—Configure cabling
HP xw4000/xw6000 series workstations
1.
Connect a flexible disk-type power connector from the workstation power supply to the power
connector on the IEEE-1394 card
1
. Connect the front IEEE-1394 I/O cable to the I/O connector on
the IEEE-1394 card
2
.
Figure 3 Connect power cable to IEEE-1394 card
2.
If necessary, remove the plastic plug or adhesive label from the front 1394 port.
✎
NOTE:
If an adhesive label is covering the front 1394 port, the front bezel must be removed to remove the
adhesive label.