HP Xw6600 HP Workstations - Dual-port NIC installation
HP Xw6600 - Workstation - 2 GB RAM Manual
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xw6600 manual content summary:
- HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 1
Network Interface Card (NIC ) in your HP workstation. Kit contents This kit includes the following components: ● Dual-port NIC ● Driver CD ● Installation instructions ● Warranty documentation © 2008 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered trademark of Hewlett - HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 2
from a hot component, enable the surface to cool before power from the equipment by unplugging the power cord from the electrical outlet. WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation HP accessories are for use in HP Workstation - HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 3
downloaded BIOS and driver updates on your workstation. 3 Power down the workstation. 4 Disconnect power from the workstation. 5 Remove the access cover. Additional information For product-specific component information, see the Service and Technical Reference Guide for your HP workstation at - HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 4
2-Installing the dual-port NIC Introduction This section describes how to install the NIC in your workstation. Procedure: Installing the NIC Table 2 Installing the NIC Step Action 1 Release the PCI retainer levers by pressing them down, then out (1), as shown next. 2 Remove the applicable - HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 5
reassembly process involves reinstalling the side access panel and restoring power to the workstation. Step 4-Installing NIC software For instructions on installing NIC software, refer to the driver CD supplied with this installation kit. NOTE: The HP NC360T PCIe Dual Port Gigabit NIC is built for - HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 6
NIC 概要 NIC)を HP NIC CD © 2008 Hewlett-Packard Development Company, L.P. HP Invent ロゴは Hewlett-Packard Development Company, L.P Printed in the U.S. JAWW 概要 1 - HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 7
警告! 警告! い。 http://www.hp.com/ergo Documentation CD CD CD 2 ESD 注記: HP HP 手順 1 概要 NIC 2 NIC JAWW - HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 8
表 1 手順 操作 1 http://www.hp.com/go/workstationsupport BIOS 2 BIOS 3 4 5 追加情報 http://www.hp.com/support/workstation_manuals HP Service and Technical Reference Guide 手順 2 NIC 概要 NIC 手順: NIC 表 2 NIC 手順 操作 1 PCI 1)。 JAWW 2 PCI - HP Xw6600 | HP Workstations - Dual-port NIC installation - Page 9
表 2 NIC 手順 操作 NIC 3)。 4 PCI 4)。 手順 3 手順 4:NIC NIC CD 注記: HP NC360T PCIe NIC は、HP 向けに Intel Corporation CD Intel HP NC360T は Intel® Pro/1000 PT Dual Port Server Adapter 4 NIC JAWW
Dual-port NIC installation
Introduction
This document describes how to install a dual-port Network Interface Card (NIC ) in your HP workstation.
Kit contents
This kit includes the following components:
●
Dual-port NIC
●
Driver CD
●
Installation instructions
●
Warranty documentation
© 2008 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered
trademark of Hewlett-Packard Development Company, L.P. Printed in the U.S.
ENWW
Introduction
1