HP Xw6600 HP xw Workstation series - Installing and Configuring SAS Hardware R - Page 6

LSI Logic MPT Setup Utility - Array creation - case

Page 6 highlights

Figure 4 Logic MPT Setup Utility - RAID properties Step 5: To create a new array, select one of the options to create either an IM, IME, or IS volume and press enter. IM, or Integrated Mirroring, is also known as RAID-1. IME, or Integrated Mirroring Enhanced, is RAID-10. IS, or Integrated Striping, is RAID-0. The next screen will list the disks. For each disk to be part of the array, move to the column labeled "RAID Disk" and press the space bar to add the disk to the array. The next column, "Hot Spr," can be used to mark disks to be hot spares in case of disk failure. When the disks have been marked as desired, press C to create the array. Figure 5 LSI Logic MPT Setup Utility - Array creation 6 Installing and Configuring SAS Hardware RAID on HP Workstations ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

Figure 4
Logic MPT Setup Utility – RAID properties
Step 5:
To create a new array, select one of the options to create either an IM, IME, or IS volume and
press enter. IM, or Integrated Mirroring, is also known as RAID-1. IME, or Integrated Mirroring Enhanced,
is RAID-10. IS, or Integrated Striping, is RAID-0. The next screen will list the disks. For each disk to be
part of the array, move to the column labeled “RAID Disk” and press the space bar to add the disk to
the array. The next column, “Hot Spr,” can be used to mark disks to be hot spares in case of disk failure.
When the disks have been marked as desired, press C to create the array.
Figure 5
LSI Logic MPT Setup Utility – Array creation
6
Installing and Configuring SAS Hardware RAID on HP Workstations
ENWW