HP Xw8400 Installing an IEEE-1394 card - Page 3
Step 2-Remove PCI slot cover - pci slots
 |
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installing an IEEE-1394 card Step 2-Remove PCI slot cover Open the PCI retention clamp by pressing down on the clips and moving the clamp toward the rear of the workstation 1. Pull up on the slot cover to remove it from the chassis 2. ✎ NOTE: The following illustrations are shown as examples only. Your system may look different. Figure 1 Remove PCI slot cover 3/12
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
-
11
-
12
 |
 |
3/12
Installing an IEEE-1394 card
Step 2—Remove PCI slot cover
Open the PCI retention clamp by pressing down on the clips and moving the clamp toward the rear of the
workstation
1
. Pull up on the slot cover to remove it from the chassis
2
.
✎
NOTE:
The following illustrations are shown as examples only. Your system may look different.
Figure 1 Remove PCI slot cover