HP Xw9400 Installing an IEEE-1394 card - Page 5

Step 4-Con cabling - workstation power supply

Get HP Xw9400 - Workstation - 16 GB RAM PDF manuals and user guides View all HP Xw9400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Installing an IEEE-1394 card Step 4-Configure cabling HP xw4000/xw6000 series workstations 1. Connect a flexible disk-type power connector from the workstation power supply to the power connector on the IEEE-1394 card 1. Connect the front IEEE-1394 I/O cable to the I/O connector on the IEEE-1394 card 2. Figure 3 Connect power cable to IEEE-1394 card 2. If necessary, remove the plastic plug or adhesive label from the front 1394 port. ✎ NOTE: If an adhesive label is covering the front 1394 port, the front bezel must be removed to remove the adhesive label. 5/12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
5/12
Installing an IEEE-1394 card
Step 4—Configure cabling
HP xw4000/xw6000 series workstations
1.
Connect a flexible disk-type power connector from the workstation power supply to the power
connector on the IEEE-1394 card
1
. Connect the front IEEE-1394 I/O cable to the I/O connector on
the IEEE-1394 card
2
.
Figure 3 Connect power cable to IEEE-1394 card
2.
If necessary, remove the plastic plug or adhesive label from the front 1394 port.
✎
NOTE:
If an adhesive label is covering the front 1394 port, the front bezel must be removed to remove the
adhesive label.