HP Z27 User Guide - Page 23
Using Auto-Sleep Mode, Low Blue Light, Reading, Night, Save and Return, Cancel, Power Control
View all HP Z27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
● Low Blue Light: TUV certified. Reduces blue light for improved eye comfort ● Reading: Optimizes blue light and brightness for indoor viewing ● Night: Adjusts to the lowest blue light and reduces the impact on sleep 3. Select Save and Return to save your setting and close the menu. Select Cancel if you don't want to save the setting. 4. Select Exit from the Main menu. WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup and proper posture, and health and work habits for computer users. The Safety & Comfort Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is available on the web at http://www.hp.com/ergo. Using Auto-Sleep Mode The monitor supports an OSD option called Auto-Sleep Mode that allows you to enable or disable a reduced power state for the monitor. When Auto-Sleep Mode is enabled (enabled by default), the monitor will enter a reduced power state when the computer signals low power mode (absence of either horizontal or vertical sync signal). Upon entering this reduced power state (sleep mode), the monitor screen is blanked, the backlight is turned off, and the power LED indicator turns amber. The monitor draws less than 0.5 W of power when in this reduced power state. The monitor will wake from sleep mode when the computer sends an active signal to the monitor (for example, if you activate the mouse or keyboard). You can disable Auto-Sleep Mode in the OSD. Press the Menu button on the monitor's rear panel to open the OSD. In the OSD select Power Control, select Auto-Sleep Mode, and then select Off. Using Auto-Sleep Mode 17