HP Z3100 HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and profil - Page 5
Calibrate Your Printer >, Print Profiling Chart and Install ICC profile >
UPC - 882780677531
View all HP Z3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
• Load your new paper into the printer (A3/B size minimum). • Select Next. Calibrate Your Printer > The printer will calibrate itself for use with your paper. The process takes about 10 minutes and consists of the following steps: • A calibration test chart is printed. • The test chart is allowed to dry for a period of time, the amount of time will depend on the paper type, and this is so that the colors have time to stabilize. • The test chart is scanned and measured using the HP Embedded Spectrophotometer. Print Profiling Chart and Install ICC profile > When you have defined and calibrated a new paper type, the printer automatically creates and installs the new ICC profile, to be used with your paper. The process takes about 15-20 minutes and consists of the following steps: • A profiling test chart is printed. An A3 or B format for cut sheets: 5