HP Z440 Maintenance and Service Guide - Page 121

RAID 1 configuration, RAID 1

Get HP Z440 PDF manuals and user guides View all HP Z440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 121 highlights

RAID 1 configuration Follow these steps to configure an Integrated Mirroring (IM) volume with the BIOS-based configuration utility. The procedure assumes that the system has the required drives and drive controllers. 1. During BIOS startup, press Ctrl+C when prompted to start the LSI Logic Configuration Utility. Use the arrow keys and the space bar to navigate and select options. 2. Select an appropriate adapter, then press Enter. 3. Select RAID Properties, and then press Enter. 4. Select Create IM Volume, and then press Enter. 5. To configure a two-disk mirrored volume with an optional hot-spare disk: a. On the Create New Array screen, select the primary disk for the IM volume (the disk with the data you want to mirror.) b. On the RAID Disk column for this disk, and then select Yes. The value in the Array Disk column changes to Primary. WARNING! If partitions have been defined on the selected disk, data on the disk will be lost when the mirrored volume is created. c. Select the secondary (mirrored) disk for the IM volume and set the Array Disk column value to Yes. d. Press Delete to allow the data on the disk to be erased, or press any other key to deselect the disk. 6. When all drives are selected, press C to create the array. 7. Select Save changes then exit this menu, and then press Enter. 8. When the new array is created, the Adapter Properties screen appears. Press Esc twice, and then select Exit. Configuring RAID on an LSI 2308 or LSI 9217-4i4e controller 111

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
RAID 1
configuration
Follow these steps to
configure
an Integrated Mirroring (IM) volume with the BIOS-based
configuration
utility.
The procedure assumes that the system has the required drives and drive controllers.
1.
During BIOS startup, press
Ctrl+C
when prompted to start the LSI Logic
Configuration
Utility. Use the
arrow keys and the space bar to navigate and select options.
2.
Select an appropriate adapter, then press
Enter
.
3.
Select
RAID Properties
, and then press
Enter
.
4.
Select
Create IM Volume
, and then press
Enter
.
5.
To
configure
a two-disk mirrored volume with an optional hot-spare disk:
a.
On the Create New Array screen, select the primary disk for the IM volume (the disk with the data
you want to mirror.)
b.
On the RAID Disk column for this disk, and then select
Yes
. The value in the Array Disk column
changes to Primary.
WARNING!
If partitions have been
defined
on the selected disk, data on the disk will be lost when
the mirrored volume is created.
c.
Select the secondary (mirrored) disk for the IM volume and set the Array Disk column value to
Yes
.
d.
Press
Delete
to allow the data on the disk to be erased, or press any other key to deselect the disk.
6.
When all drives are selected, press
C
to create the array.
7.
Select
Save changes then exit this menu
, and then press
Enter.
8.
When the new array is created, the Adapter Properties screen appears. Press
Esc
twice, and then select
Exit
.
Configuring
RAID on an LSI 2308 or LSI 9217-4i4e controller
111