HP Z600 HP Workstations - LSI SAS 3041E Serial Attached SCSI RAID - Page 6
Connecting standard data cables
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Attach any subsequent hard drives to ports 1-3 on the RAID controller card. Figure 5 Connecting the blind-mate data cables to the RAID card 4. Continue with Connecting the LED activity indicator on page 7. Connecting standard data cables Hard drives installed in HP 400 Workstations, HP xw Workstation series, and all optical drive bays do not have blind-mate cabling preinstalled on the system board. To connect the RAID cabling for these configurations: 1. If connecting a SAS hard drive, ensure that there is a SAS-to-SATA interconnect cable adapter (supplied with the HP workstation SAS hard drive kit) attached to the data connector on the SAS hard drive. Figure 6 Attaching the SAS-SATA adapter 6 LSI SAS 3041E Serial Attached SCSI RAID Host Bus Adapter installation ENWW