HP Z600 HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controller - Page 8
HP Z600 - Workstation - 6 GB RAM Manual
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. To connect the SAS hard drive data cables to the MiniSAS 4i to 4X SATA internal adapter cable: a. Connect the HDD-BAY-0 cable to port 0 (P0) on the MiniSAS internal adapter cable. b. Match the subsequent HDD-BAY cables to the corresponding port on the MiniSAS internal adapter cable. c. For RAID configuration, populate the internal hard drive bays before populating the optical bays with hard drives. Figure 5 Connecting the hard drive cables to the MiniSAS adapter cable 3. Attach the coupled end of the data cable to Internal connector 1 on the SAS RAID controller card. Figure 6 RAID controller with 4 internal hard drives connected 4. If connecting more than four hard drives, attach the second data cable supplied with the controller card kit to Internal connector 2 on the controller card, and continue with Standard data cable connections on page 9. 5. Continue with Connecting the LED activity indicator on page 11. 8 LSI MegaRAID® SAS 8888ELP Host Bus Adapter installation ENWW