HP Z800 CRU Dataport DX115 kit Installation - Page 4
HP 400 Workstations and HP xw4000 Workstation series - install optical drive
![]() |
UPC - 884962082454
View all HP Z800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
HP 400 Workstations and HP xw4000 Workstation series 1. Remove the front bezel from the workstation to access the optical bays. a. Lift the tab . b. Pivot the bezel to disengage the lower edge 2. Figure 2 Removing the front bezel 2. Install four (supplied) M3 x 5mm screws (black) in the lower four mounting holes. 3. Install the DX115 case in the optical drive bay using the quick release system. 4 CRU Dataport DX115 kit installation ENWW
![](/manual_guide/products/hewlettpackard-z600-cru-dataport-dx115-kit-installation-f7f47ed/4.png)
HP
400 Workstations and HP xw4000 Workstation series
1.
Remove the front bezel from the workstation to access the optical bays.
a.
Lift the tab
.
b.
Pivot the bezel to disengage the lower edge
2
.
Figure 2
Removing the front bezel
2.
Install four (supplied) M3 x 5mm screws (black) in the lower four mounting holes.
3.
Install the DX115 case in the optical drive bay using the quick release system.
4
CRU Dataport DX115 kit installation
ENWW