HP Z800 HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controller - Page 10
LSI MegaRAID® SAS 8888ELP Host Bus Adapter installation
UPC - 884962082454
View all HP Z800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3. To connect the first four hard drives: a. Attach the coupled end of the data cable to Internal connector 1 on the RAID controller . b. Attach the four splitter cables on the other end of the data cable to the data cable connectors on the hard drives 2. c. To connect power to the hard drives, see the hard drive product documentation. Figure 8 Data cable connections 4. If connecting more than four hard drives, attach the second data cable supplied with the controller card kit to Internal connector 2 on the controller card. 10 LSI MegaRAID® SAS 8888ELP Host Bus Adapter installation ENWW
3.
To connect the first four hard drives:
a.
Attach the coupled end of the data cable to
Internal connector 1
on the RAID controller
.
b.
Attach the four splitter cables on the other end of the data cable to the data cable connectors
on the hard drives
2
.
c.
To connect power to the hard drives, see the hard drive product documentation.
Figure 8
Data cable connections
4.
If connecting more than four hard drives, attach the second data cable supplied with the controller
card kit to
Internal connector 2
on the controller card.
10
LSI MegaRAID® SAS 8888ELP Host Bus Adapter installation
ENWW